Line Key Led Behavior Customization - Cisco 8800 Series Manual

Line Key LED Behavior Customization

When you submit your selection in the Custom LED Type drop down list, changes also occur in the Att
Console tab. This only happens when you configure simultaneous LED behavior for phone line keys and key
expansion module line keys.
To view the key expansion module LED behavior:
a. Select Voice > Att Console.
b. View the Att Console Key LED Pattern section.
Line Key LED Behavior Customization
The Line Key LED Behavior in your multiplatform phones has three optional settings. In the phone web page,
you can choose one of the following options:
• Default
• Preset 1
• Custom
The following table compares the basic Default and Preset 1 line key LED behavior settings.
Table 36: Basic LED Behavior on Line Keys
Field and Description
Idle—Line is idle.
Registration Failed—Line failed
to register with the server.
Registering—Line is trying to
register with the server.
Disabled—Line is disabled or
not in use.
For the Custom option, use the following color-pattern key:
Table 37: Color-Pattern Key
g = GREEN
r = RED
a = AMBER
o = OFF
When you set COLOR to OFF, PATTERN is ignored even if you set it.
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
222
Default Pattern and Color
Solid Green
Solid Amber
Slow blinking Amber
Off
COLOR (c)
Cisco IP Phone Configuration
Preset 1 Pattern and Color
Off
Off
Off
Off