Configure Missed Call Indication - Cisco 8800 Series Manual

Cisco IP Phone Configuration
You can configure this parameter in the phone configuration XML file (cfg.xml) by entering a string in this
format:
<Call_Recording_Serv ua="na">Yes</Call_Recording_Serv>
Options: Yes and No
Default: No
Step 3 (Optional) In the Programmable Softkeys section, to enable softkeys, add a string in this format in the
Connected Key List and Conferencing Key List fields.
crdstart;crdstop;crdpause;crdresume
Step 4 Click the Ext(n) tab that requires call recording.
Step 5
In the SIP Settings section, for the Call Recording Protocol parameter, select SIPINFO as the call recording
protocol.
You can configure this parameter in the phone configuration XML file (cfg.xml) by entering a string in this
format:
<Call_Recording_Protocol_1_ ua="na">SIPINFO</Call_Recording_Protocol_1_>
Options: SIPREC and SIPINFO
Default: SIPREC
Step 6 Click Submit All Changes.

Configure Missed Call Indication

You can configure a missed call alert on the phone handset LED.
You can also configure the parameters in the phone configuration file with XML(cfg.xml) code.
Before you begin
Access the phone administration web page. See
Procedure
Step 1 Select Voice > User.
The user can select User Login > Voice > User.
Step 2 In the Supplementary Services section, for the Handset LED Alert parameter, select Voicemail, Missed
Call.
You can configure this parameter in the phone configuration XML file (cfg.xml) by entering a string in this
format:
<Handset_LED_Alert ua="rw">Voicemail,Missed Call</Handset_LED_Alert>
Options: Voicemail and Voicemail, Missed Call
Default: Voicemail
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
Access the Phone Web Interface, on page
Configure Missed Call Indication
104.
245