Configure Daylight Saving Time - Cisco 8800 Series Manual

Cisco IP Phone Installation
Parameter
Daylight Saving Time Enable
Time Format
Date Format

Configure Daylight Saving Time

The phone supports automatic adjustment for daylight saving time.
Note
The time of the log messages and status messages are in UTC time. The time zone setting does not affect
them.
Before you begin
Access the phone administration web page. See
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
Description
Enables Daylight Saving Time.
Default: Yes
Choose the time format for the phone (12-hour or
24-hour).
Default: 12hr
Choose the date format for the phone (month/day or
day/month).
Default: month/day
In the phone configuration XML file (cfg.xml), enter
a string in this format:
<!-- Time -->
<Set_Local_Date__mm_dd_yyyy_ ua="na"/>
<Set_Local_Time__HH_mm_ ua="na"/>
<Time_Zone ua="na">GMT-08:00</Time_Zone>
<!--
available options:
GMT-12:00|GMT-11:00|GMT-10:00|GMT-09:00|
GMT-08:00|GMT-07:00|GMT-06:00|GMT-05:00|GMT-04:00|GMT-03:30|
GMT-03:00|GMT-02:00|GMT-01:00|GMT|GMT+01:00|GMT+02:00|GMT+03:00|
GMT+03:30|GMT+04:00|GMT+04:30|GMT+05:00|GMT+05:30|GMT+05:45|
GMT+06:00|GMT+06:30|GMT+07:00|GMT+08:00|GMT+09:00|GMT+09:30|
GMT+10:00|GMT+11:00|GMT+12:00|GMT+13:00|GMT+14:00
-->
<Time_Offset__HH_mm_ ua="na"/>
<Ignore_DHCP_Time_Offset
ua="na">Yes</Ignore_DHCP_Time_Offset>
<Daylight_Saving_Time_Rule
ua="na">start=3/-1/7/2;end=10/-1/7/2;
save=1</Daylight_Saving_Time_Rule>
<Daylight_Saving_Time_Enable
ua="na">Yes</Daylight_Saving_Time_Enable>
<Time_Format ua="na">12hr</Time_Format>
<!-- available options: 12hr|24hr
<Date_Format ua="na">month/day</Date_Format>
<!-- available options: month/day|day/month
-->
Access the Phone Web Interface, on page
Configure Daylight Saving Time
-->
104.
407