Cisco IP Phone Configuration
Parameter
G711u Enable
G711a Enable
G729a Enable
G722 Enable
G722.2 Enable
iLBC Enable
iSAC Enable
OPUS Enable
Silence Supp Enable
Description
Enables the use of a specific codec.
Perform one of the following:
• In the phone configuration file with XML(cfg.xml), enter a string in this format:
<G711u_Enable_1_ ua="rw">Yes</G711u_Enable_1_>
<G711a_Enable_1_ ua="rw">Yes</G711a_Enable_1_>
<G729a_Enable_1_ ua="rw">Yes</G729a_Enable_1_>
<G722_Enable_1_ ua="rw">Yes</G722_Enable_1_>
<G722_Enable_1_ ua="rw">Yes</G722_Enable_1_>
<G722.2_Enable_1_ ua="rw">No</G722.2_Enable_1_>
<iLBC_Enable_1_ ua="rw">No</iLBC_Enable_1_>
<iSAC_Enable_1_ ua="rw">Yes</iSAC_Enable_1_>
<OPUS_Enable_1_ ua="rw">Yes</OPUS_Enable_1_>
• In the phone web interface, set the corresponding field to Yes to enable the use
of a specific codec, or No to disable it.
Note
The transmit rate for the G.729a codec is at 8 kbps.
Enables or disables silence suppression. When set Yes, silent audio frames are not
transmitted.
Perform one of the following:
• In the phone configuration file with XML(cfg.xml), enter a string in this format:
<Silence_Supp_Enable_1_ ua="rw">No</Silence_Supp_Enable_1_>
• In the phone web interface, set this field to Yes to enable silence suppression, or
No to disable it.
Allowed values: Yes|No
Default: No
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
Audio Codec Parameters
279