Localize Your Cisco Ip Phone; Configure Time And Date On Phone Web Page - Cisco 8800 Series Manual

Cisco IP Phone Installation
Parameter
Interdigit Short Timer

Localize Your Cisco IP Phone

Before you begin
Access the phone administration web page. See
Procedure
Step 1 Select Voice > Regional.
Step 2
Configure the values in the fields in the Time and Language sections.
Step 3 Click Submit All Changes.

Configure Time and Date on Phone Web Page

You can manually set the time and date on the phone web page.
Before you begin
Access the Phone Web Interface, on page
Procedure
Step 1
Select Voice > Regional.
Step 2 In the Time section, enter the time and date information.
Step 3
Select Voice > User.
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
Description
Short timeout between entering digits when dialing.
The Interdigit_Short_Timer is used after any one digit,
if at least one matching sequence is complete as
dialed, but more dialed digits would match other as
yet incomplete sequences.
Perform one of the following:
• In the phone configuration file with
XML(cfg.xml), enter a string in this format:
<Interdigit_Short_Timer
ua="na">3</Interdigit_Short_Timer>
• In the phone web page, set a value in seconds
ranges from 0-64 seconds.
Allowed values: 0–64 seconds
Default: 3
Access the Phone Web Interface, on page
104. Review Time and Date Settings, on page
Localize Your Cisco IP Phone
104.
404.
403