Parameters For Screen Saver - Cisco 8800 Series Manual

Cisco IP Phone Configuration
The user can select User Login > Voice > User to add screen saver to the phone.
Step 2
In the Screen section, set up the fields as described in
Step 3 Click Submit All Changes.

Parameters for Screen Saver

The following table defines the function and usage of the screen saver parameters in the Screen section under
theVoice> User tab in the phone web interface. It also definesthe syntax of the stringthat is added in thephone
configuration file (cfg.xml) with XML code to configure a parameter.
Table 44: Parameters for Screen Saver
Parameter
Screen Saver Enable
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
Parameters for Screen Saver
Parameters for Screen Saver, on page
Description
Select Yes to enable a screen saver on the phone.
When the phone is idle for a specified time, it enters
screen saver mode.
Perform one of the following:
• In the phone configuration file with
XML(cfg.xml), enter a string in this format:
<Screen_Saver_Enable
ua="rw">Yes</Screen_Saver_Enable>
• In the phone web interface, set this field to Yes
to enable screen saver.
Allowed values: Yes|No
Default: No
233.
233