Cisco 8800 Series Manual page 211

Cisco IP Phone Configuration
Parameter
BACKUP ACS URL
BACKUP ACS User
BACKUP ACS Password
Note
Description
Backup URL of the ACS that uses the CPE WAN Management Protocol.
This parameter must be in the form of a valid HTTP or HTTPS URL.
The host portion of this URL is used by the CPE to validate the
ACScertificate when it uses SSL or TLS.
Perform one of the following:
Default: Blank
Backup username that authenticates the CPE to the ACS when ACS
uses the CPE WAN Management Protocol. This username is used only
for HTTP-based authentication of the CPE.
Perform one of the following:
Default: Blank
Backup password to access to the ACS for a specific user. This password
is used only for HTTP-based authentication of the CPE.
Perform one of the following:
Default: Blank
If you do not configure the above parameters, you can also fetch them through DHCP options
60,43, and 125.
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
• In the phone configuration file with XML(cfg.xml), enter a string
in this format:
<BACKUP_ACS_URL
ua="na">https://acs.url.com</BACKUP_ACS_URL>
• In the phone web page, enter a valid URL that uses the CPE WAN
Management Protocol.
• In the phone configuration file with XML(cfg.xml), enter a string
in this format:
<BACKUP_ACS_User ua="na">backup
username</BACKUP_ACS_User>
• In the phone web page, enter a valid username that authenticates
the CPE to the ACS when ACS uses the CPE WAN Management
Protocol.
• In the phone configuration file with XML(cfg.xml), enter a string
in this format:
<BACKUP_ACS_Password ua="na"/>
• In the phone web page, enter a valid password that authenticates
the CPE to the ACS when ACS uses the CPE WAN Management
Protocol.
Parameters for TR-069 Configuration
191