Cisco Headset 561 And 562 - Cisco 8800 Series Manual

Cisco Headset 561 and 562

Number
3
Cisco Headset 561 and 562
The Cisco Headset 560 Series are two wireless headsets that are developed for Cisco products and services.
The Cisco Headset 561 features a single earpiece, and offers lightweight comfort. The Cisco Headset 562
features two earpieces for use in a noisy environment or busy office.
The Cisco Headset 560 Series use a headset base to connect with Cisco IP Phones and charge the headsets.
The available options for the base are Standard base and Multibase. The Cisco Headset 560 Series with
Standard Base support connection with a single source from a phone or a computer. The Cisco Headset 560
Series with Multibase support multiple sources from phones, computers, and Bluetooth-paired devices and
provide an easy and intuitive switch among the connected sources.
You can connect the Cisco Headset 560 Series with any of the following:
• RJ9 and AUX connector (Y-cable)—Supported on Cisco IP Phones 8811, 8841, 8845, 8851, 8861, and
• USB connector—Supported on Cisco IP Phones 8851, 8861, and 8865 with multiple platforms.
The Cisco Headset 560 Series require Multiplatform Firmware Release 11.2(3) and higher. Upgrade your
phones to the latest firmware before using these headsets.
To check your phone model and the firmware version, press Applications
information. The Product name field shows your phone model. The Software version field shows the
installed load where you can get the firmware version.
Cisco Headset 561 and 562 Buttons and LED
Your headset buttons are used for basic call features.
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
468
Name
Call button
8865 with multiple platforms.
Description
Use to manage calls:
• Press once to answer an incoming call.
• Press and hold for 2 seconds to end a call.
• Press twice to reject an incoming call.
• Press once to put an active call on hold. Press again to
retrieve a call from hold.
Cisco IP Phone Accessories
and select Status > Product