Buttons And Hardware - Cisco 8851NR User Manual

CISCO 8800 SERIES
Your phone does not save the authorization code, billing code, or extra digits from the speed dial in the call
history. If you press Redial after you connect to a speed-dial destination, the phone prompts you to enter any
required authorization code, billing code, or additional digits manually.
Example
To set up a speed-dial number to call a person at a specific extension, and if you need an authorization code
and billing code, consider the following requirements:
• You need to dial 9 for an outside line.
• You want to call 5556543.
• You need to input the authorization code 1234.
• You need to input the billing code 9876.
• You must wait for 4 seconds.
• After the call connects, you must dial the extension 56789#.
In this scenario, the speed-dial number is 95556543,1234,9876,,56789#.
Related Topics
Calls That Require a Billing Code or Authorization

Buttons and Hardware

The Cisco IP Phone 8800 Series has two distinct hardware types:
• Cisco IP Phones 8811, 8841, 8851, 8851NR, and 8861—do not have a camera.
• Cisco IP Phones 8845, 8865, and 8865NR—have a built-in camera.
The following figure shows the Cisco IP Phone 8845.
GoMomentum.com
Code, on page 43
15
USER GUIDE
888.538.3690