Secure And Nonsecure Call Indication Tone; Product-Specific Configuration - Cisco 8961 Administration Manual

Features, Templates, Services, and User Setup
Feature
Shared Line
BLF Speed Dial

Secure and nonsecure call indication tone

When a phone is configured as secure (encrypted and trusted) in Unified Communications Manager, it can
be given a "protected" status. After that, if desired, the protected phone can be configured to play an indication
tone at the beginning of a call:
• Protected Device: To change the status of a secure phone to protected, check the "Protected Device"
• Play Secure Indication Tone: To enable the protected phone to play a secure or nonsecure indication
Only protected phones hear these secure or nonsecure indication tones. Nonprotected phones never hear tones.
If the overall call status changes during the call, the indication tone changes accordingly. At that time, the
protected phone plays the appropriate tone.
A protected phone plays a tone or not under these circumstances:
• When the option to play the tone is enabled, Play Secure Indication Tone option is enabled (True):
If the Play Secure Indication Tone option is disabled, no tone plays.

Product-Specific Configuration

Cisco Unified Communications Manager Administration allows you to set some product-specific configuration
parameters for Cisco Unified IP Phones in any of the following windows:
• Phone Configuration window (Device > Phone); Product Specific Configuration portion of window
• Common Phone Profile Configuration window (Device > Device Settings > Common Phone Profile)
• Enterprise Phone Configuration window (System > Enterprise Phone Configuration)
REVIEW DRAFT - CISCO CONFIDENTIAL
check box in the Phone Configuration window in Cisco Unified Communications Manager Administration
(Device > Phone).
tone, set the Play Secure Indication Tone setting to True. By default, Play Secure Indication Tone is set
to False. You set this option in Cisco Unified Communications Manager Administration (System >
Service Parameters). Select the server and then the Unified Communications Manager service. In the
Service Parameter Configuration window, select the option in the Feature - Secure Tone area. The default
is False.
◦ When end-to-end secure media is established and the call status is secure, the phone plays the
secure indication tone (three long beeps with pauses).
◦ When end-to-end nonsecure media is established and the call status is nonsecure, the phone plays
the nonsecure indication tone (six short beeps with brief pauses).
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 10.0
Supported
Yes
Yes
Secure and nonsecure call indication tone
Notes
(SIP)
165