Specify An Audio Device For A Call; Change The Ringtone; Screen Preferences; Change The Screen Saver - Cisco 6800 Series User Manual

Specify an Audio Device for a Call

Specify an Audio Device for a Call
You can connect an analog headset, a Bluetooth headset, and a USB headset simultaneously to your phone.
However, you can use only one headset at time.
When you connect multiple headsets to the phone, you can choose the audio device to use for a call. Your
choice applies when you place or answer a call with a line key or the corresponding softkey.
Procedure
Step 1
Press Applications
Step 2
Select User preferences > Audio preferences > Preferred audio device.
Step 3
Press Select to choose one of the options:
• None—Selects the last used audio device.
• Speaker—Selects the speakerphone as the audio device.
• Headset—Selects a headset as the audio device.
Step 4
Press Set to save the selection.

Change the Ringtone

You can set a ringtone for an incoming call.
Procedure
Step 1
Press Applications
Step 2
Select User preferences > Ringtone > Ext (n) - Ring tone, where n= extension number.
Step 3
Scroll through the list of ringtones and press Play to hear a sample.
Step 4
Press Select and then Set to save a selection.

Screen Preferences

The User preferences > Screen preferences menu allows you to set your phone screen display options.

Change the Screen Saver

You can enable your phone screen saver, and specify its appearance and the amount of time for the phone to
be idle before the screen saver appears.
Procedure
Step 1
Press Applications
Cisco IP Phone 6800 Series Multiplatform Phones User Guide
74
.
.
.
Settings