GE C2K Hardware Reference Manual page 17

Table of Contents

Advertisement

• C8051F120/1/2/3/4/5/6/7 C8051F130/1/2/3 Mixed Signal ISP Flash MCU Family—Sili-
con Laboratories Inc., Rev 1.3, August 2004
• M41T62 Serial Access Real-Time Clock with Alarms - STMicroelectronics, Rev 10.0,
November 2005
• LTC4244/LTC4244-1 Rugged, CompactPCI Bus Hot Swap Controllers—Linear Technol-
ogy Corporation, 42441f, February 2004
• Maxim MAX6657/MAX6658/MAX6659 ±1°C, SMBus-Compatible Remote/Local Tem-
perature Sensors with Overtemperature Alarms—Maxim Integrated Products, 19-2034;
Rev. 2, March 2002
Specifications
• ICMB 1.0 Rev 1.3—Intelligent Chassis Management Bus Bridge Specification, April
2003.
• IEEE Std. 802.3-2002—IEEE Standard for Information Technology- Telecommunications
and information exchange between systems- Local and metropolitan area networks - Spe-
cific requirements Part 3: Carrier sense multiple access with collision detection
(CSMD/CD) access method and physical layer specifications, March 2002.
• IEEE Std. 1101.2-1992(2001)—IEEE Standard for Mechanical Core Specifications for
Conduction-Cooled Eurocards, January 1993.
• IEEE Std. 1101.10-1996—IEEE Standard for Additional Mechanical Specifications for
Microcomputers using the IEEE Std 1101.1-1991 Equipment Practice, December 1996.
• IEEE Std. 1149.1-1990—IEEE Standard Test Access Port and Boundary Scan Architec-
ture, June 1993.
• IEEE Std. 1284-2000—IEEE Standard Signaling Method for a Bidirectional Parallel
Peripheral Interface for Personal Computers, September 2000.
• IEEE1386-2001—IEEE Standard for a Common Mezzanine Card (CMC) Family, June,
2001.
• IEEE1386.1-2001—IEEE Standard Physical and Environmental Layers for PCI Mezza-
nine Cards (PMC), June, 2001.
• IEEE Std. 802.3-2002—Part 3: Carrier Sense Multiple Access Collision Detection
(CSMA/CD) Access Method and Physical Layer Definitions, March 2002.
• Intel, Universal Host Controller Interface (UHCI) Design Guide, Revision 1.1,
297650-002.
• IPC-A-610—Acceptability of Electronic Assemblies, Revision C, January 2000.
• IPC-6012A with Amendment 1—Qualification and Performance Specification for Rigid
Printed Boards, July 2000.
• PICMG 2.0 Rev 3.0—CompactPCI Specification, October 1999.
• PICMG 2.1 Rev 2.0—Hot Swap Specification, January 2001
• PICMG 2.16 Rev 1.0—Packet Switching Backplane Specification, September 2001
• PICMG 2.3 Rev 1.0—PMC on CompactPCI Specification, August, 1998.
• PICMG 2.9 Rev 1.0—CompactPCI System Management Specification, February, 2000.
• PCI Special Interest Group—PCI Local Bus Specification, Revision 2.3, October 2001.
1-8
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Introduction
C2K User's Guide

Advertisement

Table of Contents
loading

Table of Contents