2.3
Back Panel Connections
Back panel connections
The following picture shows the back panel of the server and identifies the connectors for
all devices.
Figure 2-1 PE SC1430-based Back Panel Connections
2.4
Installing the Server in a Cabinet
Overview
The server is mounted in a cabinet in a horizontal position. This procedure assumes a
new cabinet (800mm deep equipment cabinet, Honeywell model number MP-C8LCB1 or
1000mm deep equipment cabinet, Honeywell model number MP-C1MCB1) was shipped
from the Honeywell factory with workstation mounting kit model numbers TP-WPCMF1
(fixed mount) and/or TP-WPCMS1 (slide mount) pre-assembled.
12/2007
PE SC1430-Based Honeywell Server PE SC1430-Based Honeywell Server
Release Independent
Honeywell
2. Platform Installation
2.3. Back Panel Connections
33