Servicing The Lcnp4M Card; Lcnp4M Card Description; Replace The Lcnp4M Card; Figure 4-1 Lcnp4M Card - Honeywell PE SC1430 Planning, Installation And Service Manual

4. Platform Servicing

4.2. Servicing the LCNP4M Card

4.2 Servicing the LCNP4M Card

LCNP4M card description

The LCNP4M card has 16 MB of on-board memory.

Replace the LCNP4M card

The LCNP4M card is located in the PCI-X slot 5. Use the following procedure to replace
the LCNP4M card. See also "Removing an Expansion Card" and "Installing an
Expansion Card" in the Dell™ PowerEdge™ SC1430 Systems Installation and
Troubleshooting Guide.
ESD HAZARD
The LCNP4M board is an electrostatically sensitive device. Use a grounding
strap and grounded work surfaces and equipment when handling this
component. Store and transport parts only in electrostatically safe
containers.
Step
1
Perform all procedures in Section 4.1 to access the LCNP4M card
including:
Shutting down system
Disconnecting power cord and cables from the server
Accessing the electronics.
52 PE SC1430-Based Honeywell Server PE SC1430-Based Honeywell Server

Figure 4-1 LCNP4M Card

Action
Honeywell
12/2007
Release Independent