Honeywell PE SC1430 Planning, Installation And Service Manual page 42

2. Platform Installation
2.7. Starting up your Server
Step
3 Verify that TPN Address appears in the LEDs field of the LCNP Status
display once Board 0 has been configured for the node's TPN address.
You will need to reset the LCNP after configuration.
REFERENCE
Refer to the LCNP Status section in the LCNP Status User's Guide for more
information.
42 PE SC1430-Based Honeywell Server PE SC1430-Based Honeywell Server
Action
Honeywell
12/2007
Release Independent