1.10 Industrial Regulatory Compliance; Overview; Electromagnetic Compatibility (Emc); Table 1-13 Emc Specifications (Industrial Regulatory) - Honeywell PE SC1430 Planning, Installation And Service Manual

1.10 Industrial Regulatory Compliance

Overview

The compliance specifications in this section apply to cabinet installations.
WARNING
Honeywell does not claim Safety Compliance or Electromagnetic Compatibility (EMC)
Compliance for system equipment configurations that have not been described in this
manual as standard system configurations. Any equipment configuration other than
that described in this publication decertifies the Safety and EMC compliance of this
product.

Electromagnetic Compatibility (EMC)

Table 1-13 EMC Specifications (Industrial Regulatory)

European Community:
Emissions:
Immunity:
Attention: The following formula is a proximity guideline, for use of Portable
Transceivers
(walkie-talkies) in the frequency range of 80MHz to 1GHz:
D > 0.30
P)
D = Distance from equipment, in meters.
P = Power Output of the Portable Transceivers (walkie-talkies), in Watts.
Examples:
P = 10 Watts, D > 0.949 meters
P = 5 Watts,
P = 1 Watt,
Note: Electrical cables, which are routed external to the equipment, must
be fully shielded cables (360 degree metallic shielding), in order to comply
with the above EMC standards.
12/2007 PE SC1430-Based Honeywell Server PE SC1430-Based Honeywell Server
Release Independent
IEC 61326, 1997 (Industrial Locations, CISPR 11, Class A)
IEC 61326, 1997 (Industrial Locations)
√{P} (D must be greater than 0.30 multiplied by the square root of
*
D > 0.671 meters
D > 0.300 meters
Honeywell
1. System Planning
1.10. Industrial Regulatory Compliance
27