Honeywell PE SC1430 Planning, Installation And Service Manual page 59

ESD HAZARD
Expansion card are electrostatically sensitive device. Use a grounding strap
and grounded work surfaces and equipment when handling these
components. Store and transport parts only in electrostatically safe
containers.
Step
1 Perform all procedures in Section 4.1 to access the expansion card slots
including:
Shutting down system
Disconnecting power cord and cables from the sever
Accessing the electronics.
2
Disconnect cable(s) from the expansion card.
3
To access the expansion slots, push the two release tabs towards each
other on the card retention door and rotate the door open.
4
While wearing a grounded ESD wrist strap, gently slide the expansion
card toward the front of the system, and lift the expansion card up and out
of the expansion card slot.
12/2007 PE SC1430-Based Honeywell Server PE SC1430-Based Honeywell Server
Release Independent
4.4. Servicing Honeywell Options
Action
Honeywell
4. Platform Servicing
59