2. Platform Installation
2.2. Power and Grounding Requirements
2.2
Power and Grounding Requirements
Grounding for server based nodes
The ground connection is made through the third wire in the AC power cord.
Grounding cabinet
The TPN System Installation Manual, SW20-600, Section 4, "System Grounding"
contains information on grounding furniture, including the following:
Ground Wiring Overview
Grounding LCN Cabinets and Stations
Cabinet Logic Ground
Grounding LCN Cables
AC Power Warning
WARNING
The power supply circuit is connected to AC power when the power cable is
connected. The power control switch on the front panel only enables the
power supply circuit outputs.
ATTENTION
It is strongly recommended that the power cord be connected to a clean
power source with backup such as an Uninterruptible Power Source (UPS).
32
PE SC1430-Based Honeywell Server PE SC1430-Based Honeywell Server
DANGER
SHOCK HAZA RD
53 89 5
Honeywell
12/2007
Release Independent