Monitor - Honeywell PE SC1430 Planning, Installation And Service Manual

1. System Planning
1.9. Specifications
with USB interface) to a provide human interface (booting and maintenance activities) to
cabinet mounted servers. Either option comes pre-installed from the Honeywell factory.

Monitor

A monitor is required for the server operating system. This platform is configured with a
single screen option only and an on-board integrated ATI ES1000 video controller. A
monitor does not come with this server platform; you must order a monitor separately. A
laptop with terminal emulation software can also be used.
CAUTION: The video cable must support DDC. If either a monitor or video cable that
does not support DDC is connected, the display generator will default to a resolution that
precludes communication with the system software and stops startup. A quick check to
determine if a cable is DDC compatible is to check that pins 5, 9, and 12 of the HD 15
connector are wired. The supplied cable, part number 51196742-200 is DDC compatible.
The server platform supports industrial standard video formats, typically 1280x1024, at a
refresh rate of 75Hz or 1024x768 at a refresh rate of 75Hz.
26 PE SC1430-Based Honeywell Server PE SC1430-Based Honeywell Server
Honeywell
12/2007
Release Independent