Platform Servicing; Servicing The Pe Sc1430-Based Server; Before You Begin Servicing; Accessing The Electronics - Honeywell PE SC1430 Planning, Installation And Service Manual

4.1

Servicing the PE SC1430-based Server

Before you begin servicing

Attention
Perform a complete system shutdown before you begin any of the
procedures in this section.
CAUTION
Before you begin any of the procedures in this section, follow the safety
instructions in the Dell System Information Guide.
CAUTION
To avoid electrical shock, always unplug your computer from the electrical
outlet before opening the cover.
Attention
Be careful when opening the computer cover to ensure that you do not
accidentally disconnect cables from the system board.

Accessing the electronics

To simplify servicing the server enclosure, see also "Removing and Installing Parts" in
the Dell™ PowerEdge™ SC1430 Systems Installation and Troubleshooting Guide.
Step
1
Perform a complete system shutdown.
2
Disconnect power cord and cables from the bank panel of the server.
12/2007 PE SC1430-Based Honeywell Server PE SC1430-Based Honeywell Server
Release Independent

4. Platform Servicing

Honeywell
Action
47