Honeywell PE SC1430 Planning, Installation And Service Manual page 53

Step
2
Disconnect the LCN MAU cable from the LCNP4M card.
3
To access the expansion slots, push the two release tabs towards each
other on the card retention door and rotate the door open.
4
While wearing a grounded ESD wrist strap, gently slide the LCNP4M card
toward the front of the system, and lift the LCNP4M card up and out of the
PCI-X slot 5.
12/2007 PE SC1430-Based Honeywell Server PE SC1430-Based Honeywell Server
Release Independent
4.2. Servicing the LCNP4M Card
Action
Honeywell
4. Platform Servicing
53