Table of Contents
Advertisement
Honeywell Access Systems
Overview
The LANSRLU1 (UDS100) Device Server connects serial devices such as Secu-
rity Alarms and Access Control Devices to Ethernet networks using the IP proto-
col family. The UDS100 connects these devices through a TCP data channel or
through a Telnet connection to computers or another Device Server.
The UDS100 uses the Internet Protocol (IP) for network communications and the
Transmission Control Protocol (TCP) to assure that no data is lost or duplicated,
and that everything sent to the connection arrives correctly at the target.
Requirements for WIN-PAK 2.0/Pro R3 and Higher
LANSRLU1 at the Remote End
•
N-485-PCI-2L (with 25-pin M-M null modem adapter)
•
Requirements for WIN-PAK 1.1x
UDS100s
•
at the Local End
at the Remote End
485-PCI-2L (with 25-pin M-M null modem adapter)
•
Troubleshooting Requirements
9 pin female to 25-pin male serial cable
•
Network cross-over cable
•
Pinouts and Connections
LEDs
7-101002-00
DB25Serial Port
Power Plug
RJ45 Ethernet Port
*+3.3VDC
reg.out
*9-30VDC
DCD
unreg.in
out
13
25
DTR in
DB25 Female DCE Interface RS232
* Optional Power Connection
LANSRLU1
CTS
RX
GND
out
out
DSR
RTS
TX
out
in
in
1
14
3
Hide quick links:
Advertisement
Table of Contents
