Port_Security Messages - Cisco 3110 Message Manual

Catalyst switch module for ibm bladecenter system
Hide thumbs Also See for 3110:
Table of Contents

Advertisement

PORT_SECURITY Messages

Error Message PM-4-TOO_MANY_APP: application '[chars]' exceeded registration limit.
Error Message PM-4-UNKNOWN_HOST_ACCESS: Invalid Host access value ([dec]) is
received.
Error Message PM-4-VMPS_CFG: Dynamic access VLAN [dec] same as voice vlan on [chars].
PORT_SECURITY Messages
This section contains the port security messages.
Error Message PORT_SECURITY-2-PSECURE_VIOLATION:Security violation occurred caused
by MAC [enet] on port [chars].
Cisco Catalyst Switch Module 3110 and 3012 for IBM BladeCenter System Message Guide
2-70
The port manager detected an invalid request. [chars] is the application.
Explanation
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Enter the show
tech-support user EXEC command to gather data that might help identify the nature of the error. If
you still require assistance, contact IBM technical support and provide the representative with the
gathered information. For more information about the online tools and about contacting IBM, see
the
"Error Message Traceback Reports" section on page
Explanation
The host access table is being accessed with an invalid host access value. [dec] is the
value that is received.
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Enter the show
tech-support user EXEC command to gather data that might help identify the nature of the error.
Use the Bug Toolkit to look for similar reported problems. If you still require assistance, contact
IBM technical support and provide the representative with the gathered information. For more
information about the online tools and about contacting IBM, see the
Reports" section on page
The access VLAN ID on the VMPS server is the same as the voice VLAN ID on the
Explanation
interface. [dec] is the access VLAN ID, and [chars] is the physical interface.
Assign the access VLAN on the VMPS server to a VLAN ID that is different
Recommended Action
from the voice VLAN ID.
An unauthorized device attempted to connect on a secure port. MAC [enet] is the MAC
Explanation
address of the unauthorized device, and port [chars] is the secure port.
Identify the device that attempted to connect on the secure port. Notify your
Recommended Action
network system administrator of this condition.
1-6.
Chapter 2
Message and Recovery Procedures
1-6.
"Error Message Traceback
OL-12191-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

3112

Table of Contents