Cisco 3110 Message Manual page 43

Chapter 2 Message and Recovery Procedures
Error Message EC-5-CANNOT_ALLOCATE_AGGREGATOR: Aggregator limit reached, cannot
allocate aggregator for group [dec]
Explanation
Recommended Action
the same aggregator.
Error Message EC-5-CANNOT_BUNDLE1: Port-channel [chars] is down, port [chars] will
remain stand-alone
Explanation
up. The first [chars] is the EtherChannel. The second [chars] is the port number.
Recommended Action
Error Message EC-5-CANNOT_BUNDLE2: [chars] is not compatible with [chars] and will
be suspended ([chars])
Explanation
in the EtherChannel. For the interface to join the bundle (EtherChannel), change the interface
attributes to match the EtherChannel attributes. The first [chars] is the interface to be bundled, the
second [chars] is the physical interface (a switch port or a routed port) that is already in the bundle,
and the third [chars] is the reason for the incompatibility.
Recommended Action
Error Message EC-5-CANNOT_BUNDLE_LACP: [chars] is not compatible with aggregators in
channel [dec] and cannot attach to them ([chars]).
Explanation
channel. [chars] is the incompatible port. [chars] is the short interface name, such as Gi1/0/1 on a
stacking-capable switch, [dec] is the channel group number, and the last [chars] is the reason.
Recommended Action
they match the port.
Error Message EC-5-COMPATIBLE: [chars] is compatible with port-channel members.
Explanation
channel or ports within the port channel. The system has detected that the attributes of the port now
match the port-channel attributes. [chars] is the affected port.
Recommended Action
OL-12191-01
A new aggregator cannot be allocated in the group. [dec] is the affected group.
Change the port attributes of the ports in the group so that they match and join
The aggregation port is down. The port remains standalone until the aggregation port is
Ensure that the other ports in the bundle have the same configuration.
The interface has different interface attributes than the EtherChannel or the other ports
Change the interface attributes to match the EtherChannel attributes.
The port has different port attributes than the port channel or ports within the port
For the port to join the EtherChannel bundle, change the port attributes so that
A port was not operational because its attributes were different from those of the port
No action is required.
Cisco Catalyst Switch Module 3110 and 3012 for IBM BladeCenter System Message Guide
EC Messages
2-27