Cisco 3110 Message Manual page 22

ACLMGR Messages
Error Message ACLMGR-3-PACLTTABLE: Not in truth table: IPSrcGrd [dec] PACL [dec].
Explanation
first [dec] is the action specified by IP source guard, and the second [dec] is the action specified by
the port ACL.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Enter the show
running-config user EXEC command to gather data that might help identify the nature of the error.
Use the Bug Toolkit to look for similar reported problems. If you still require assistance, contact
IBM technical support and provide the representative with the gathered information. For more
information about the online tools and about contacting IBM, see the
Reports" section on page
Error Message ACLMGR-3-QOSTTABLE: Not in truth table: ACL [dec] in map, action [dec].
Explanation
ACL number, and the second [dec] is the action corresponding to the specified ACL number.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, contact IBM technical support and
provide the representative with the gathered information. For more information about the online
tools and about contacting IBM, see the
Error Message ACLMGR-3-RELOADED: Reloading [chars] label [dec] feature.
Explanation
the hardware. One or more features had previously been unloaded because of lack of space. [chars]
is the direction (input or output), and [dec] is the label number.
Recommended Action
Error Message ACLMGR-3-UNKNOWNACTION: Unknown VMR access group action [hex].
Explanation
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, contact IBM technical support and
provide the representative with the gathered information. For more information about the online
tools and about contacting IBM, see the
Cisco Catalyst Switch Module 3110 and 3012 for IBM BladeCenter System Message Guide
2-6
A software error occurred while trying to merge the configured port ACL features. The
Copy the message exactly as it appears on the console or in the system log.
1-6.
A software error occurred while trying to merge a QoS policy map. The first [dec] is the
Copy the message exactly as it appears on the console or in the system log.
The ACL manager is now able to load more of the configured features on this label into
No action is required.
An internal software error has occurred. [hex] is an internal action code.
Copy the message exactly as it appears on the console or in the system log.
Chapter 2
"Error Message Traceback Reports" section on page
"Error Message Traceback Reports" section on page
Message and Recovery Procedures
"Error Message Traceback
1-6.
1-6.
OL-12191-01