Cisco 3110 Message Manual page 115

Chapter 2 Message and Recovery Procedures
Error Message SW_VLAN-3-VTP_PROTOCOL_ERROR: VTP protocol code internal error
[chars].
Explanation
request, a packet, or a timer expiration. [chars] is the internal error.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Enter the show
tech-support user EXEC command to gather data that might help identify the nature of the error.
Use the Bug Toolkit to look for similar reported problems. If you still require assistance, contact
IBM technical support and provide the representative with the gathered information. For more
information about the online tools and about contacting IBM, see the
Reports" section on page
Error Message SW_VLAN-4-BAD_PM_VLAN_COOKIE_RETURNED: VLAN manager unexpectedly
received a bad PM VLAN cookie from the Port Manager, VLAN indicated [dec].
Explanation
which translated to a bad VLAN ID. [dec] is the VLAN ID.
Recommended Action
command and by copying the error message exactly as it appears on the console or system log and
entering it in the Output Interpreter tool. Use the Bug Toolkit to look for similar reported problems. For
more information about these online tools and about contacting IBM see the
Reports" section on page
Error Message SW_VLAN-4-BAD_STARTUP_VLAN_CONFIG_FILE: Failed to configure VLAN from
startup-config. Fallback to use VLAN configuration file from non-volatile memory.
Explanation
file. It will use the binary VLAN configuration file in NVRAM memory.
Recommended Action
Error Message SW_VLAN-4-BAD_VLAN_CONFIGURATION_FILE: VLAN configuration file
contained incorrect verification word [hex].
Explanation
value. The VLAN configuration file is invalid, and it has been rejected. [hex] is the incorrect
verification value.
Recommended Action
command and by copying the error message exactly as it appears on the console or system log and
entering it in the Output Interpreter tool. Use the Bug Toolkit to look for similar reported problems. For
more information about these online tools and about contacting IBM, see the
Reports" section on page
OL-12191-01
The VTP code encountered an unexpected error while processing a configuration
Copy the message exactly as it appears on the console or in the system log.
1-6.
The VLAN manager received an upcall and a VLAN cookie from the port manager,
Find out more about the error by using the show tech-support privileged EXEC
1-6.
The VLAN software did not use the VLAN configuration from the startup-configuration
No action is required.
The VLAN configuration file read by the VLAN manager did not begin with the correct
Find out more about the error by using the show tech-support privileged EXEC
1-6.
Cisco Catalyst Switch Module 3110 and 3012 for IBM BladeCenter System Message Guide
SW_VLAN Messages
"Error Message Traceback
"Error Message Traceback
"Error Message Traceback
2-99