Cisco 3110 Message Manual page 17

Message and Recovery Procedures
This chapter describes the switch system messages in alphabetical order by facility. Within each facility,
the messages are listed by severity levels 0 to 7: 0 is the highest severity level, and 7 is the lowest severity
level. Each message is followed by an explanation and a recommended action.
The messages listed in this chapter do not include the hostname or the date/time stamp designation that
displays only if the software is configured for system log messaging.
The chapter includes these message facilities:
ACLMGR Messages, page 2-3
•
BACKUP_INTERFACE Messages, page 2-7
•
BADTRANSCEIVER Messages, page 2-7
•
BSPATCH Messages, page 2-8
•
CFGMGR Messages, page 2-9
•
CLS_ACC Messages, page 2-11
•
• DHCP_SNOOPING Messages, page 2-15
• DOT1X Messages, page 2-18
DOT1X_SWITCH Messages, page 2-21
•
DTP Messages, page 2-24
•
DWL Messages, page 2-26
•
EC Messages, page 2-26
•
ETHCNTR Messages, page 2-31
•
EXPRESS_SETUP Messages, page 2-32
•
• FRNTEND_CTRLR Messages, page 2-33
GBIC_SECURITY Messages, page 2-34
•
GBIC_SECURITY_CRYPT Messages, page 2-36
•
GBIC_SECURITY_UNIQUE Messages, page 2-37
•
HARDWARE Messages, page 2-38
•
HLFM Messages, page 2-40
•
HPSECURE Messages, page 2-41
•
• IGMP_QUERIER Messages, page 2-42
• IMAGEMGR Messages, page 2-43
OL-12191-01
(only the Catalyst Switch Module 3110)
(only the Catalyst Switch Module 3110)
(only the Catalyst Switch Module 3110)
Cisco Catalyst Switch Module 3110 and 3012 for IBM BladeCenter System Message Guide
C H A P T E R
(only the Catalyst Switch Module 3110)
(only the Catalyst Switch Module 3110X)
(only the Catalyst Switch Module 3110X)
(only the Catalyst Switch Module 3110X)
2
2-1