Cisco 3110 Message Manual page 126

VQPCLIENT Messages
Error Message VQPCLIENT-2-INITFAIL: Platform-specific VQP initialization failed.
Quitting.
Explanation
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Enter the show
tech-support user EXEC command to gather data that might help identify the nature of the error.
Use the Bug Toolkit to look for similar reported problems.If you still require assistance, contact IBM
technical support and provide the representative with the gathered information. For more
information about the online tools and about contacting IBM, see the
Reports" section on page
Error Message VQPCLIENT-2-IPSOCK: Could not obtain IP socket.
Explanation
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Enter the show
tech-support user EXEC command to gather data that might help identify the nature of the error.
Use the Bug Toolkit to look for similar reported problems. If you still require assistance, contact
IBM technical support and provide the representative with the gathered information. For more
information about the online tools and about contacting IBM, see the
Reports" section on page
Error Message VQPCLIENT-2-PROCFAIL: Could not create process for VQP. Quitting.
Explanation
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Enter the show
tech-support user EXEC command to gather data that might help identify the nature of the error.
Use the Bug Toolkit to look for similar reported problems. If you still require assistance, contact
IBM technical support and provide the representative with the gathered information. For more
information about the online tools and about contacting IBM, see the
Reports" section on page
Error Message VQPCLIENT-2-SHUTDOWN: Interface [chars] shutdown by VMPS.
Explanation
Recommended Action
shut down, verify the configuration on the VMPS.
Error Message VQPCLIENT-2-TOOMANY: Interface [chars] shutdown by active host limit.
Explanation
that port. [chars] is the interface name.
Recommended Action
interface configuration command on the interface.
Cisco Catalyst Switch Module 3110 and 3012 for IBM BladeCenter System Message Guide
2-110
An error occurred during initialization of the VQP client platform-specific code.
Copy the message exactly as it appears on the console or in the system log.
1-6.
An error occurred when the system attempted to open an IP socket to the VMPS.
Copy the message exactly as it appears on the console or in the system log.
1-6.
An error occurred while creating a process for the VQP client.
Copy the message exactly as it appears on the console or in the system log.
1-6.
The VMPS has directed that an interface be shut down. [chars] is the interface name.
No action is normally required. If you think that the port should not have been
The system has shut down an interface because too many hosts have requested access to
To reactivate the port, remove the excess hosts, and enter a no shutdown
Chapter 2 Message and Recovery Procedures
"Error Message Traceback
"Error Message Traceback
"Error Message Traceback
OL-12191-01