Cisco 3110 Message Manual page 107

Chapter 2 Message and Recovery Procedures
Error Message STACKMGR-4-SWITCH_ADDED_VM: Switch [dec] has been ADDED to the stack
(VERSION_MISMATCH).
Note
Explanation
switch number.
Recommended Action
Error Message STACKMGR-4-SWITCH_REMOVED: Switch [dec] has been REMOVED from the
stack.
Note
Explanation
Recommended Action
Error Message STACKMGR-5-MASTER_READY: Master Switch [dec] is READY.
Note
Explanation
Recommended Action
Error Message STACKMGR-5-SWITCH_READY: Switch [dec] is READY.
Note
Explanation
Recommended Action
OL-12191-01
This message applies only to the Catalyst Switch Module 3110.
A switch that has been added to the stack has a different software version. [dec] is the
No action is required.
This message applies only to the Catalyst Switch Module 3110.
The specified switch has been removed from the stack. [dec] is the switch number.
No action is required.
This message applies only to the Catalyst Switch Module 3110.
The stack master is ready for use. [dec] is the stack master switch number.
No action is required.
This message applies only to the Catalyst Switch Module 3110.
The switch is ready. [dec] is the switch number.
No action is required.
Cisco Catalyst Switch Module 3110 and 3012 for IBM BladeCenter System Message Guide
STACKMGR Messages
2-91