Ip_Device_Tracking Messages - Cisco 3110 Message Manual

Catalyst switch module for ibm bladecenter system
Hide thumbs Also See for 3110:
Table of Contents

Advertisement

IP_DEVICE_TRACKING Messages

Error Message IMAGEMGR-6-AUTO_COPY_SW: [chars].
Note
Error Message IMAGEMGR-6-AUTO_DOWNLOAD_SW_INITIATED: Auto-download-software process
initiated for systems [bits: [hex]].
Note
Error Message IMAGEMGR-6-AUTO_DOWNLOAD_SW: [chars].
Note
IP_DEVICE_TRACKING Messages
This section contains the IP Device Tracking message.
Error Message IP_DEVICE_TRACKING-4-TABLE_LOCK_FAILED: Table already locked by
process-id [dec]([chars])
Note
Cisco Catalyst Switch Module 3110 and 3012 for IBM BladeCenter System Message Guide
2-44
This message applies only to the Catalyst Switch Module 3110.
A line of output from the auto-copy-software process appears. [chars] is a text message
Explanation
reporting status of the upgrade process.
No action is required.
Recommended Action
This message applies only to the Catalyst Switch Module 3110.
Systems with incompatible software have been detected in the switch stack. The stack
Explanation
now attempts to download software from a previously configured location and to install it to make
the systems compatible. [bits [hex]] is the bit representation of the switch number.
No action is required.
Recommended Action
This message applies only to the Catalyst Switch Module 3110.
Explanation
A line of output from the auto-download-software process appears [chars] is a text
message reporting the status of the upgrade process.
No action is required.
Recommended Action
This message applies only to the Catalyst Switch Module 3110.
The IP device tracking table could not be updated due to a lock held by another process.
Explanation
[dec] is the process number, and [chars] is the process.
No action is required.
Recommended Action
Chapter 2
Message and Recovery Procedures
OL-12191-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

3112

Table of Contents