Express_Setup Messages - Cisco 3110 Message Manual

EXPRESS_SETUP Messages

EXPRESS_SETUP Messages
This section contains the Express Setup messages that appear when you use a 10/100/1000 or the
Ethernet management port to connect to the PC. For Express Setup with the Ethernet management port,
see the
Error Message EXPRESS_SETUP-3-UNABLE_TO_RESET_CONFIG: [chars].
Error Message EXPRESS_SETUP-6-CONFIG_IS_RESET: [chars].
Error Message EXPRESS_SETUP-6-MODE_ENTERED.
Error Message EXPRESS_SETUP-6-MODE_EXITED.
Cisco Catalyst Switch Module 3110 and 3012 for IBM BladeCenter System Message Guide
2-32
CLS_ACC Messages section.
The system is unable to reset the configuration. [chars] is a text string that explains why
Explanation
the reset failed. For example,
error removing private config file
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, contact IBM technical support and
provide the representative with the gathered information. For more information about the online
tools and about contacting IBM, see the
The configuration is reset. [chars] is a text message that clarifies the reset event, such
Explanation
as
The configuration is reset and the system will now reboot
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, contact IBM technical support and
provide the representative with the gathered information. For more information about the online
tools and about contacting IBM, see the
The Express Setup mode is active.
Explanation
No action is required.
Recommended Action
The Express Setup mode is no longer active.
Explanation
No action is required.
Recommended Action
error renaming config file
.
"Error Message Traceback Reports" section on page
"Error Message Traceback Reports" section on page
Chapter 2 Message and Recovery Procedures
,
error removing config file
.
, or
1-6.
1-6.
OL-12191-01