Configuring Aaa Accounting - Cisco SCE8000 Configuration Manual

Configuring the Available Interfaces
How to Specify AAA Privilege Level Authorization Methods
Step 1 From the SCE(config)# prompt, type aaa authentication enable default method1 [method2...] and
press Enter.
You may list a maximum of four methods; all four methods explained above. List them in the order of
priority.
How to Delete the AAA Privilege Level Authorization Methods List
From the SCE(config)# prompt, type no aaa authentication enable default and press Enter.
Step 1
If the privilege level authorization methods list is deleted, the default login authentication method only
(enable password) will be used. TACACS+ authentication will not be used.

Configuring AAA Accounting

Use this command to enable or disable TACACS+ accounting.
•
•
•
•
About AAA Accounting
If TACACS+ accounting is enabled, the SCE platform sends an accounting message to the TACACS+
server after every command execution. The accounting message is logged in the TACACS+ server for
the use of the network administrator.
By default, TACACS+ accounting is disabled.
Options
The following options are available:
•
How to Enable AAA Accounting
Step 1 From the SCE(config)# prompt, type aaa authentication accounting commands level default
stop-start group tacacs+ and press Enter.
The start-stop keyword (required) indicates that the accounting message is sent at the beginning and the
end (if the command was successfully executed) of the execution of a CLI command.
Cisco SCE8000 Software Configuration Guide, Rel 3.1.6S
5-18
About AAA Accounting, page 5-18
Options, page 5-18
How to Enable AAA Accounting, page 5-18
How to Disable AAA Accounting, page 5-19
level — The privilege level for which to enable the TACACS+ accounting
Chapter 5 Configuring the Management Interface and Security
OL-16479-01