Monitoring Tacacs+ Servers; Monitoring Tacacs+ Users; Configuring Access Control Lists (Acls); About Access Control Lists - Cisco SCE8000 Configuration Manual

Chapter 5 Configuring the Management Interface and Security
How to Disable AAA Accounting
Step 1 From the SCE(config)# prompt, type aaa authentication accounting commands level default and
press Enter.

Monitoring TACACS+ Servers

Use these commands to display statistics for the TACACS+ servers.
•
•
How to Display Statistics for TACACS+ Servers
From the SCE# prompt, type show tacacs and press Enter.
Step 1
How to Display Statistics, Keys and Timeouts for TACACS+ Servers
From the SCE# prompt, type show tacacs all and press Enter.
Step 1
Note

Monitoring TACACS+ Users

Use this command to display the users in the local database, including passwords.
From the SCE# prompt, type show users and press Enter.
Step 1
Note

Configuring Access Control Lists (ACLs)

•
•
•
•
OL-16479-01
How to Display Statistics for TACACS+ Servers, page 5-19
How to Display Statistics, Keys and Timeouts for TACACS+ Servers, page 5-19
Although most show commands are accessible to viewer level users, the ' all ' option is available
only at the admin level. Use the command ' enable 10 ' to access the admin level.
Although most show commands are accessible to viewer level users, this command is available
only at the admin level. Use the command ' enable 10 ' to access the admin level.
About Access Control Lists, page 5-20
Options, page 5-20
How to Add Entries to an ACL, page 5-21
How to Remove an ACL, page 5-21
Configuring the Available Interfaces
Cisco SCE8000 Software Configuration Guide, Rel 3.1.6S
5-19