Basic Cisco SCE8000 Platform Operations
This chapter describes how to start up the Cisco SCE8000 platform, reboot, and shutdown. It also
describes how to manage configurations.
•
•
•
•
•
•
Starting the Cisco SCE8000 Platform
The procedures for starting the Cisco SCE8000 platform are explained in the following sections:
•
•
•
Checking Conditions Prior to System Startup
Check the following conditions before you start your Cisco SCE8000 platform:
•
•
OL-16479-01
Starting the Cisco SCE8000 Platform, page 3-1
Managing Configurations, page 3-3
Example for Displaying the SCE Platform Version Information, page 3-8
How to Display the SCE Platform Inventory, page 3-10
How to Display the System Uptime, page 3-14
Rebooting and Shutting Down the SCE Platform, page 3-14
Checking Conditions Prior to System Startup, page 3-1
Starting the System and Observing Initial Conditions, page 3-2
Final Tests, page 3-2
Both power supply units are installed and connected. (If only one power supply is connected it will
put the box in warning state.)
First-time startup at installation:
Cisco SCE8000 platform connected to local console (CON port)
–
The console terminal is turned on and properly configured
–
3
C H A P T E R
Cisco SCE8000 Software Configuration Guide
3-1