Loading Mibs; Pcube To Cisco Mib Mapping - Cisco SCE8000 Configuration Manual

Loading MIBs

Loading MIBs
It is important to load the MIBs in the proper order.
Before loading any new CISCO-SERVICE-CONTROL MIB, load the following MIBs in this order:
1.
2.
3.
4.
5.
6.
7.
8.
Loading procedure for standard MIBs and other legacy Cisco MIBs is explained here:
http://tools.cisco.com/Support/SNMP/do/BrowseMIB.do?local=en&step=2

pcube to Cisco MIB Mapping

This section is an overview of how the former pcube MIB maps to the current Cisco MIBs. Two P-cube
MIBs are mapped; PcubeSeMIB and PcubeEngageMIB (CISCO-SCABB-MIB).
Table A-4
Pcube Object Name
pcube
pcubeProducts
pcubeModules
pcubeSeMIB
Table A-5
PcubeSEMIB Group Name
pcubeSeMIBpcubeModuleGroup cServiceControlMIB
pcubeSeConformance
pcubeSeGroups
pcubeSystemGroup
pcubeChassisGroup
pcuebModuleGroup
pcubeLinkGroup
pcubeDiskGroup
Cisco SCE8000 Software Configuration Guide, Release 3.1.6S
A-4
SNMPv2-SMI.my
SNMPv2-CONF.my
SNMPv2-TC.my
SNMP-FRAMEWORK-MIB.my
ENTITY-MIB.my
INET-ADDRESS-MIB.my
CISCO-SMI.my
CISCO-TC.my
Overall tree structure: related objects
PcubeSeMIB
New MIB Object Name/MIB Name
CISCO-SERVICE-CONTROL or
cServiceControl
ciscoMgmt
Removed
See Table A-5 on page A-4
New MIB Object Name/MIB Name
cServiceControlNotifs
cServiceControlObjects
ENTITY and ENTITY-EXTENTION MIBs
ENTITY and ENTITY-EXTENTION MIBs
ENTITY and ENTITY-EXTENTION MIBs
CISCO-SERVICE-CONTROL-LINK-MIB
HOST-RESOURCES-MIB
Appendix A Cisco Service Control MIBs
OL-16479-01