How To Add A Host To The Host Table; Options; Adding Hosts To Removing Them From The Host Table: Examples; How To Display Current Dns Settings - Cisco SCE8000 Configuration Manual

Domain Name Server (DNS) Settings
How to Remove All Domain Name Servers
From the SCE(config)# prompt, type no ip name-server and press Enter.
Step 1
Removes all configured DNS servers.

How to Add a Host to the Host Table

Options

The following options are available:
•
•
Step 1 From the SCE(config)# prompt, type ip host hostname ip-address and press Enter.
Adds the specified host to the host table.

Adding Hosts to Removing them from the Host Table: Examples

The following example shows how to add a host to the host table.
SCE(config)#ip host PC85 10.1.1.61
The following example shows how to remove a hostname together with all its IP mappings.
SCE(config)#no ip host PC85

How to Display Current DNS Settings

From the SCE# prompt, type show hosts and press Enter.
Step 1
Displays current DNS settings.

Displaying Current DNS Settings: Example

The following example shows how to display current DNS information.
SCE#show hosts
Default domain is Cisco.com
Name/address lookup uses domain service
Name servers are 10.1.1.60, 10.1.1.61
Host
----
PC85
sce#
Cisco SCE8000 Software Configuration Guide, Rel 3.1.6S
5-46
hostname — The name of the host.
ip-address — The IP address of the host
Address
-------
10.1.1.61
Chapter 5 Configuring the Management Interface and Security
OL-16479-01