Connection Management - Cisco SCE8000 Configuration Manual

Chapter 11 Managing the SCMP
•
One SCE platform supports a maximum of 20 SCMP peer devices.

Connection Management

The SCMP attempts to maintain an open connection to each peer device.
The following figure illustrates the SCMP connection state functionality.
Figure 11-3
Keep-alive timeout Keep-alive timeout
The loss-of-sync timeout prevents the SCE platform from retaining sessions that are obsolete and whose
identity-keys have been replaced or moved to other sessions thus miss-classification risk is limited.
OL-16479-01
Anonymous groups
An anonymous group is a specified IP range, possibly assigned a subscriber template (see
Anonymous Groups and Subscriber Templates, page
SCMP associates each SCMP peer device with at least one anonymous group. SCMP generates
subscribers for this anonymous group when it detects traffic from the SCMP peer device that is not
mapped to any subscriber. SCMP assigns the SCMP peer manager-Id to this generated
anonymous-subscriber. If you have assigned a subscriber template to the group, the anonymous
subscribers generated have properties as defined by that template. If you have not assigned a
subscriber template, the default template is used.
SCMP Connection State Functionality
Loss-of synch timeout/
Remove peer sessions
Not
connected
Connection establishment/ Connection establishment/
Re-query all anonymous Re-query all anonymous
and all introduced and all introduced
subscribers subscribers
Connected
9-4.)
Not-in-
synch
Connection establishment/ Connection establishment/
Re-query all anonymous Re-query all anonymous
Cisco SCE8000 Software Configuration Guide, Rel 3.1.6S
About SCMP
11-5