How To Display The Statistics For A Specified Scmp Peer Device; Monitoring The Radius Client - Cisco SCE8000 Configuration Manual

Chapter 11 Managing the SCMP

How to display the statistics for a specified SCMP peer device

From the SCE> prompt, type show scmp name peer_device_name counters and press Enter.
Step 1
Example
SCE>show scmp name isg counters
SCMP Connection 'isg' counters:
Total messages sent:
Total messages received:
Establish requests sent:
Establish replies received:
Accounting requests sent:
Accounting replies received:
Subscriber queries sent:
Subscriber query response recv: 0
Request retry exceeded:
Requests replied with errors:
Subscriber requests received:
Subscriber responses sent:
Failed Requests:
Keep-alive sent:
Keep-alive received:

Monitoring the RADIUS Client

Use the following command to monitor the SCMP RADIUS client. This command displays the general
configuration of the RADIUS client.
Step 1 From the SCE> prompt, type
OL-16479-01
72
72
1
1
20
20
0
0
0
50
50
0
1
1
show ip radius-client
Cisco SCE8000 Software Configuration Guide, Rel 3.1.6S
Monitoring the SCMP Environment
and press Enter.
11-15