Guidelines; How To Define Recurring Daylight Saving Time Transitions - Cisco SCE8000 Configuration Manual

Configuring Time Clocks and Time Zone
The following options are available:
•
•
•
•
•
•
•

Guidelines

General guidelines for configuring daylight saving time transitions:
•
•
•
•
•
•
•

How to Define Recurring Daylight Saving Time Transitions

From the SCE(config)# prompt, type clock summer-time zone recurring [week1 day1 month1 time1
Step 1
week2 day2 month2 time2 [ offset ]] and press Enter.
Configures daylight saving time to start and stop on the specified days every year.
Cisco SCE8000 Software Configuration Guide, Rel 3.1.6S
5-42
zone — the time zone code for daylight saving time
week (recurring only)— the week of the month on which daylight saving begins (week1) and ends
(week2)
day (recurring only) — the day of the week on which daylight savings begin (day1) and ends (day2)
date (non-recurring only) — the date of the month on which daylight saving begins (date1) and ends
(date2)
month — the month in which daylight saving begins (month1) and ends (month2)
year (non-recurring only) — the year in which daylight saving begins (year1) and ends (year2)
offset — the difference in minutes between standard time and daylight saving time.
Default = 60 minutes
Specify the time zone code for daylight saving time.
recurring — specify a day of the month (week#|first|last/day of the week/month).
not recurring — specify a date (month/day of the month/year).
Define two days:
Day1 = beginning of daylight saving time.
–
Day2 = end of daylight saving time.
–
In the Southern hemisphere, month2 must be before month1, as daylight saving time begins in the
fall and ends in the spring.
Specify the exact time that the transition should occur (24 hour clock).
Time of transition into daylight saving time — according to local standard time.
–
Time of transition out of daylight saving time — according to local daylight savings time.
–
For the clock summer-time recurring command, the default values are the United States transition
rules:
Daylight saving time begins: 2:00 (AM) on the second Sunday of March.
–
– Daylight saving time ends: 2:00 (AM) on the first Sunday of November.
Chapter 5 Configuring the Management Interface and Security
OL-16479-01