Deleting Subscribers Managed By An Scmp Peer Device; Options; Deleting An Scmp Peer Device; Defining The Subscriber Id - Cisco SCE8000 Configuration Manual

Chapter 11 Managing the SCMP

Deleting Subscribers Managed by an SCMP Peer Device

Use this command to clear all the subscribers that are managed by a specified SCMP peer device.

Options

The following options are available:
•
From the SCE(config if)# prompt, type no subscriber scmp name peer-device-name all and press
Step 1
Enter.

Deleting an SCMP Peer Device

You cannot delete an SCMP peer device that has anonymous groups assigned to it. You must remove all
associated anonymous groups before deleting the device.
First remove all anonymous groups assigned to the device:
Step 1
SCE(config if)# no subscriber anonymous-group name group-name [IP-range range][template
template] scmp name peer-device-name
Repeat this step for all anonymous groups assigned to the SCMP peer device.
Step 2
When all anonymous groups have been removed from the device, exit LineCard Interface Configuration
Step 3
mode
SCE(config if)# exit
Delete the device
Step 4
SCE(config)#no scmp name peer_device_name

Defining the Subscriber ID

You can define the structure of the subscriber ID via this command by specifying which of the following
elements to include and in which order:
•
•
•
The GUID is always appended at the end of the subscriber ID as defined by this command.
Note You must disable the SCMP interface before executing this command.
OL-16479-01
peer_device_name — User-assigned name of the SCMP peer device
Calling-Station-Id
NAS-port-Id
User-Name
Cisco SCE8000 Software Configuration Guide, Rel 3.1.6S
Configuring the SCMP
11-11