Utilities; Working With Sce Platform Files; Working With Directories; How To Create A Directory - Cisco SCE8000 Configuration Manual

Utilities

This module describes the following utilities:
•
•

Working with SCE Platform Files

The CLI commands include a complete range of file management commands. These commands allow
you to create, delete, copy, and display both files and directories
Regarding disk capacity: While performing disk operations, the user should take care that the addition
Note
of new files that are stored on the SCE disk do not cause the disk to exceed 70%.
•
•

Working with Directories

•
•
•
•
•

How to Create a Directory

mkdir
Step 1 From the SCE# prompt, type mkdir directory-name and press Enter.
OL-16479-01
Working with SCE Platform Files, page 4-1
The User Log, page 4-5
Working with Directories, page 4-1
Working with Files, page 4-3
How to Create a Directory, page 4-1
How to Delete a Directory, page 4-2
How to Change Directories, page 4-2
How to Display your Working Directory, page 4-2
How to List the Files in a Directory, page 4-2
C H A P T E R
Cisco SCE8000 Software Configuration Guide, Rel 3.1.6S
4
4-1