Options; Configure The Failure Recovery Mode: Examples; Configuring The Sce Platform/Sm Connection - Cisco SCE8000 Configuration Manual

Configuring the SCE Platform/SM Connection

Options

The following options are available:
•
•
The default value is operational.
From the SCE(config)# prompt, type failure-recovery operation-mode operational|non-operational
Step 1
and press Enter.
Specify the desired failure recovery mode.

Configure the Failure Recovery Mode: Examples

Example 1
This example sets the system to boot as non-operational after a failure.
SCE(config)#failure-recovery operation-mode non-operational
Example 2
This example sets the system to the default failure recovery mode.
SCE(config)# default failure-recovery operation-mode

Configuring the SCE Platform/SM Connection

•
•
The user can configure the behavior of the SCE platform in case of failure of the Subscriber Manager
(SM):
•
•
Cisco SCE8000 Software Configuration Guide, Rel 3.1.6S
7-12
operational — after failure, the system will return to operational mode.
non-operational — after failure, the system will remain not operational.
Configuring the Behavior of the SCE Platform in Case of Failure of the SM, page 7-13
Configuring the SM-SCE Platform Connection Timeout, page 7-13
If SM functionality is critical to the operation of the system — configure the desired behavior of the
SCE platform if any loss of connection with the SM (may be due either to failure of the SM or failure
of the connection itself).
If SM functionality is not critical to the operation of the system — no action needs to be configured
In this case you can specify that the
'warning' when the link is down
system operational-status of the
.
Chapter 7 Configuring the Connection
should be
SCE platform
OL-16479-01