Cisco SCE8000 Configuration Manual page 81

Chapter 5 Configuring the Management Interface and Security
How to Add a User with an MD5 Encrypted Password Entered in Clear Text, page 5-14
•
How to Add a User with an MD5 Encrypted Password Entered as an MD5 Encrypted String,
•
page 5-14
Options
The password is defined with the username. There are several password options:
No password — Use the nopassword keyword.
•
Password — Password is saved in clear text format in the local list.
•
Use the password parameter.
Encrypted password — Password is saved in encrypted (MD5) form in the local list. Use the secret
•
keyword.
Password may be defined by either of the following methods:
–
–
The following options are available:
name — name of the user to be added
•
password — a clear text password. May be saved in the local list in either of two formats:
•
–
–
• encrypted-secret — an MD5 encryption string password
The following keywords are available:
nopassword — There is no password associated with this user
•
secret — the password is saved in MD5 encrypted form. Use with either of the following keywords
•
to indicate the format of the password as entered in the command:
–
–
How to Add a User with a Clear Text Password
From the SCE(config)# prompt, type username name password password and press Enter.
Step 1
How to Add a User with No Password
Step 1 From the SCE(config)# prompt, type username name nopassword and press Enter.
OL-16479-01
Specify a clear text password, which is saved in MD5 encrypted form
Specify an MD5 encryption string, which is saved as the user MD5-encrypted secret password
as clear text
in MD5 encrypted form if the secret keyword is used
0 — use with the password option to specify a clear text password that will be saved in MD5
encrypted form
5 — use with the encrypted-secret option to specify an MD5 encryption string that will be
saved as the user MD5-encrypted secret password
Configuring the Available Interfaces
Cisco SCE8000 Software Configuration Guide, Rel 3.1.6S
5-13