Appendix; Cisco Service Control Mibs; Mib Files - Cisco SCE8000 Configuration Manual

Cisco Service Control MIBs

The SCE platform originally supported the standard MIB-II and a proprietary Service Control Enterprise
MIB. The proprietary pcube MIB enabled the external management system to perform configuration,
performance, troubleshooting and alerting operations specific to the SCE platform that were not
provided by the standard MIB.
The proprietary pcube MIBs has been replaced by a combination of standard and Cisco MIBs and new
Cisco Service Control MIBs. The new MIB structure was designed to keep backward compatibility and
provide the same information as provided in the past as much as possible.
This appendix explains how to map the proprietary pcube MIB supported in previous releases to the new
MIB structure. It points out backward compatible issues and provides mapping guidelines from old MIB
or OID group to a new MIB.
These MIB updates are supported on the SCE8000 platform only. The pcube MIB is backward
Note
compatible to 3.1.6 for the SCE 1000 and SCE 2000 platforms.
The list of supported MIBs is described at the following URL under the Cisco Service Routing Products
section. Select the desired product and then the desired release.
http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml
All Cisco MIBs and some of the common standard MIBs can be obtained at the following URL:
http://tools.cisco.com/Support/SNMP/do/BrowseMIB.do?local=en&step=2

MIB Files

The pcube MIB was grouped into several MIBs, each of which represented a certain aspect or
functionality in the SCE platform (see the tables in the
Mappings, page A-5
The pcube MIB files have been replaced by MIBs from three sources:
•
•
•
OL-16479-01
section for more details).
standard MIBs
existing Cisco MIBs
new Cisco Service Control MIBs
A P P E N D I X
pcube to Cisco MIB Mapping: Detailed OID
Cisco SCE8000 Software Configuration Guide, Release 3.1.6S
A
A-1