Managing Traffic Rules And Counters; How To View A Specified Traffic Rule; How To View All Traffic Rules; How To View A Specified Traffic Counter - Cisco SCE8000 Configuration Manual

Configuring Traffic Rules and Counters
How to Delete a Traffic Rule
From the SCE(config if)# prompt, type no traffic-rule name name and press Enter.
Step 1
Removes the specified traffic rule.
How to Delete all Traffic Rules
From the SCE(config if)# prompt, type no traffic-rule all and press Enter.
Step 1
Removes all existing traffic rules.

Managing Traffic Rules and Counters

Use these commands to display existing traffic rule configuration, as well as traffic counter configuration
(packets/bytes and the name of the rule using the counter) and traffic counter value.
You can also reset a specific counter or all counters.
•
•
•
•
•
•

How to View a Specified Traffic Rule

From the SCE# prompt, type show interface linecard 0 traffic-rule name rule-name and press Enter.
Step 1
Displays the configuration of the specified traffic rule.

How to View all Traffic Rules

From the SCE# prompt, type show interface linecard 0 traffic-rule all and press Enter.
Step 1
Displays the configuration of all existing traffic rules.
Cisco SCE8000 Software Configuration Guide
6-14
How to View a Specified Traffic Rule, page 6-14
How to View all Traffic Rules, page 6-14
How to View a Specified Traffic Counter, page 6-15
How to View all Traffic Counters, page 6-15
How to Reset a Specified Traffic Counter, page 6-15
How to Reset all Traffic Counters, page 6-15
Chapter 6 Configuring the Line Interface
OL-16479-02