Cisco SCE8000 Configuration Manual page 178

Monitoring Subscribers
From the SCE> prompt, type show interface linecard 0 subscriber property propertyname equals
Step 1
property-val and press Enter.
How to display subscribers that are greater than or less than a specified value of a subscriber property
Options
The following options are available:
• propertyname — name of the subscriber property to match
• property-val — value of that subscriber property to match
From the SCE> prompt, type show interface linecard 0 subscriber property propertyname
Step 1
greater-than|less-than property-val and press Enter.
How to display subscribers that match a specified prefix
Options
The following options are available:
prefix — subscriber prefix to match
•
From the SCE> prompt, type show interface linecard 0 subscriber prefix prefix and press Enter.
Step 1
How to display subscribers that match a specified suffix
Options
The following options are available:
suffix — subscriber suffix to match
•
Step 1 From the SCE> prompt, type show interface linecard 0 subscriber suffix suffix and press Enter.
How to display the number of subscribers that match a specified value of a subscriber property
Options
The following options are available:
propertyname — name of the subscriber property to match
•
• property-val — value of that subscriber property to match
From the SCE> prompt, type
Step 1
equals property-val and press Enter.
Cisco SCE8000 Software Configuration Guide, Rel 3.1.6S
9-14
how interface linecard 0 subscriber amount property propertyname
s
Chapter 9 Managing Subscribers
OL-16479-01