Cisco SCE8000 Configuration Manual page 228

Configuring the SCMP
How to Define an SCMP Peer Device
Options
The following options are available:
•
•
•
•
•
Defaults:
•
•
Step 1 From the SCE(config)# prompt, type scmp name peer_device_name radius radius_hostname secret
shared_secret [auth-port auth-portnumber acct-port acct-portnumber] and press Enter.
How to Assign the SCMP Peer Device to an Anonymous Group
This command defines the specified anonymous group to be the IP range of the SCMP peer device. You
must define the specified SCMP peer device before assigning the anonymous group.
Options
The following options are available:
•
•
•
•
From the SCE(config if)# prompt, type subscriber anonymous-group name group-name IP-range
Step 1
range [template template] scmp name peer-device-name and press Enter.
How to Remove an Anonymous Group from the SCMP Peer Device
This command defines the specified anonymous group to be the IP range of the SCMP peer device. You
must define the specified SCMP peer device before assigning the anonymous group.
From the SCE(config if)# prompt, type no subscriber anonymous-group name group-name and press
Step 1
Enter.
Cisco SCE8000 Software Configuration Guide, Rel 3.1.6S
11-10
peer_device_name — User-assigned name of the SCMP peer device
radius_hostname — IP address or host-name of the RADIUS host (if a host-name is used, it must be
valid at time of the configuration)
shared_secret — RADIUS shared secret
auth-portnumber (optional) — authorization port number
acct-portnumber (optional) — accounting port number
auth-port# — 1812
acct-port# — 1813
group-name — Name of the anonymous subscriber group to be associated with the specified SCMP
peer device.
range (optional) — IP range defined for the anonymous group
template (optional) — group template assigned to the anonymous group
peer-device-name — User-assigned name of the SCMP peer device
Chapter 11 Managing the SCMP
OL-16479-01