Prompt Indications - Cisco SCE8000 Configuration Manual

Chapter 2 Command Line Interface
Example:
This example illustrates moving into and out of configuration modes as follows:
•
•
•
•
•
•
•
•
•
SCE#configure
SCE(config)#clock timezone PST -10
SCE(config)#interface GigabitEthernet 1/1
SCE(config-if)#speed 100
SCE(config-if)#exit
SCE(config)#interface Linecard 0
SCE(config-if)#link mode forwarding
SCE(config-if)#exit
SCE(config)#exit
sce#

Prompt Indications

The on-screen prompt indicates your authorization level, your command hierarchy level, and the
assigned host name. The structure of the prompt is:
<hostname (mode-indication) level-indication>
Authorization levels are indicated as follows:
This prompt...
>
#
#>
Command hierarchy levels are indicated as follows:
This command hierarchy...
User Exec
Privileged Exec
Global Configuration
Interface Configuration
Line Configuration
OL-16479-01
Enter global configuration mode
Configure the SCE platform time zone
Enter GigabitEthernet Interface configuration mode
Configure the speed of the management interface
Exit the GigabitEthernet Interface (management) configuration mode to the global configuration
mode
Enter the Linecard Interface configuration
Define the link mode
Exit Linecard Interface configuration mode to the global configuration mode
Exit global configuration mode
Authorization and Command Levels (Hierarchy)
Indicates this...
indicates User and Viewer levels
indicates Admin level
indicates Root level
Is indicated as...
SCE>
sce#
(config)#
SCE
(config-if)#
SCE
(config-line)#
SCE
Cisco SCE8000 Software Configuration Guide, Rel 3.1.6S
2-5