Table of Contents
Advertisement
Chapter 5 Web GUI Setup and Monitoring
Modules
You can customize the Summary Dashboard by temporarily minimizing or
removing the modules displayed. Each module has a maximize and minimize
button, allowing you to view or hide various modules. The default view is displayed
when you refresh the Summary Dashboard page.
You can also customize the Dashboard by clicking Add/Remove Module. The
Dashboard Configuration window is displayed. The following table describes the all
the available modules.
Module
Decoded Program Status
Audio Status
Current Input Status
Tuner Performance
Video Status
Channel Status
PID Information
CI Status
Fault Active List
Auto-Refresh
The system automatically refreshes the Summary Dashboard page every minute.
Click Auto Refresh: On/Off to toggle between enabling or disabling the automatic
refresh feature.
Alarms/Warnings
The bottom right corner of the Summary Dashboard page displays the total number
of active alarms, active warnings, and clear messages. Clear messages is calculated
as follows: total number of alarms + total number of warnings - total number of
active alarms - total number of active warnings.
160
Description
Displays channel and service information.
Displays the current audio status information, such as
the audio format and sampling frequency.
Displays the current RF Tuning Status information,
including the downlink frequency and signal status.
Displays the satellite dish status, such as the C/N
Margin and Signal Level.
Displays the current video information.
Displays the channel status information, such as the
type of CA used and whether the receiver is
authorized to receive the signal.
Displays the PIDs associated with the channels.
Displays the CAM card information.
Displays the currently active alarms and warnings.
Advertisement
Table of Contents
