Table of Contents
Advertisement
Chapter 5 Web GUI Setup and Monitoring
a
Click Source Filter Setup. The Source Filter dialog box opens.
b Click Add Row.
c
If White List is selected as the Source Filter, enter the IP address of a trusted
server the unit is allowed to receive streams. The unit is allowed to receive
streams from servers with IP addresses listed here.
If Black List is selected as the Source Filter, enter the IP address of a server
that is not trusted. The unit is allowed to receive streams from any server,
except for the servers with IP addresses listed here.
d Click Save.
e
Click OK. You can add up to 8 IP addresses.
8
Click Apply.
Configuring IP De-Jittering
The de-jittering engine has the ability to de-jitter two streams simultaneously (from
Data1 and Data2 ports), based on the selected PCR PID for each stream.
1
In the Input Setup page (Input > Input Setup), click the IP tab. Refer to the De-
Jitter Configuration area.
2
From the Algorithm drop-down list, choose the de-jittering algorithm (VBR or
CBR).
174
Advertisement
Table of Contents
